2006 PETERBILT 387
Category : Other
Year : 2006
Engine Size : -
Transmission : -
Chassis No. : 1NP7DU9X76D654434
No longer available - Sold or withdrawn from sale


2006 Peterbilt 387 3-Car Transporter
VIN:  1NP7DU9X76D654434
Model: 387
Engine: Caterpillar C13
12.5 liter (763 cubic inch) Inline 6-cylinder
445 hp@1600rpm, 1650 ft/lbs@1200rpm (ACERT)
High Efficiency Cooling System
Transmission: 10-Speed Fuller / Model RTO16910B-DM2 Ultrashift
Front Axle: Dana Spicer E1322W, 13,200 lbs, 3.5in drop, Taper Leaf Springs w/Shocks
Rear Axle: Dana Spicer DSP40, Ratio 3.70, 40,000 lbs. Rear Axle
PHP10 Aluminun Hub, Cast Drum, 16.5x7 Cam Brakes
LMS Hubs, Tandem 46,000lb Axle
PB Low Low Air Leaf, 40,000lbs
Tires and Wheels:
Front: BR 16PLY 295/80R22.5 on 22.5X8.25 Aluminum Wheels
Rear: BR 14PLY 295/75R22.5 on 22.5X8.25 Aluminum Wheels
Bumpers and Battery Box:
Molded Aero Bumper, one-piece
Chassis Aero Fairings 
Aluminum Battery Box
Box interior width: 99 (8 feet, 3 inches)
Box interior height: 114 (9 feet, 6 inches)
Box interior length: 389 (32 feet, 5 inches)
Front loading deck length: 170 (14 feet, 2 inches)
Rear loading deck length: 216 (18 feet)
Deck width: 88 (7 feet, 4 inches)
Rear floor loading length: 227 (18 feet, 11 inches)
Rear floor width: 99 (8 feet, 3 inches)
Fuel Tanks: Two 26 Aluminum 150-gallon tanks
Fresh water tank: 85 gallons
Gray water tank: 52 gallons
Black water tank: 52 gallons

Custom ordered from new by Tom and Susan Armstrong, this Canepa Concept Transporter has been professionally kept and maintained and is a marvel to behold. Outfitted to haul up to three cars this truck comes with all the conveniences needed for the perfect track day. After easily unloading your cars on the 6,000lb capacity aluminum hydraulic liftgate it's time for the Peterbilt to perform its magic trick. Operated by a simple wireless remote control, and with a minimum of preparation, the front car platform lifts up to reveal a complete luxury lounge underneath. Outfitted with a well-appointed bathroom, two couches, table, cabinets, and a flat-screen TV this temperature-controlled environment is the perfect place to retire between events.


Under the skin are upgraded front and rear shocks, and a lowered front suspension. At the rear of the vehicle, down in one of the many spacious belly boxes is a 20kW water-cooled diesel generator that is ready to power any needs the truck and its team may have. Also at the ready is a 3-Hp air compressor with 20-gallon tank. With a full canopy, power outlets, and lighting you will want for very little when the transporter is parked at your favorite track.


With a Caterpillar C13 cranking out 445 hp and 1650 ft/lbs of torque the truck moves effortlessly, even with a full load of cars and equipment. A Fuller 10-speed automatic transmission takes the work out of shifting, and a well-appointed drivers cabin with fully adjustable leather seats makes for a comfortable ride. Only 65,000 miles on the odometer and practically brand-new inside and out. This is a great opportunity to own a road-tested and ready to use luxury custom transporter that is just missing one thing... your logo on the side.

Information from the original Concept Transporters Build Sheet:

Deluxe Lounge Accommodations With Collapsible Walls:                                                                           

Custom designed and built lounge with collapsible walls to accommodate. 

Approximately 12' in length

Custom leather sofa that folds into a bed located along curbside wall

Custom dinette area between bathroom and front wall.  Dinette converts to sleeping area

All cabinetry commercial style custom construction with high quality exterior veneer covering

Color coordinated hand fitted and applied textured wall and ceiling covering

Commercial grade color coordinated carpet floor covering

High-density multi-layer sound insulating pad used throughout floor in lounge.

(2) Radius corner single sliding tinted windows with sliding screens

Retractable blinds on both windows